Purple Eyes Haunted Mansion Wallpaper printed pattern
This is a 12 inch by 12 inch sheet of patterned printed heat transfer vinyl (htv) or adhesive vinyl.
Adhesive vinyl requires transfer tape to remove your cut and weeded design from its carrier onto your surface.
This is a 12 inch by 12 inch sheet of patterned printed heat transfer vinyl (htv) or adhesive vinyl.
Adhesive vinyl requires transfer tape to remove your cut and weeded design from its carrier onto your surface.
HTV requires heat mask to remove your cut and weeded design from its carrier onto your garment.
Although a free piece per order will be included, you may need more and I would suggest purchasing extra sheets which are available in my shop in another listing.
Both are reusable for up to a few times and can be stored on the backing it comes on.
Choose between:
Permanent Adhesive
Removable Adhesive
Clear Cast Adhesive
Glitter Adhesive
HTV
Waterslide Clear
Waterslide White
PERMANENT ADHESIVE: This is a white opaque base with a clear permanent adhesive. Whatever I print on it will show on what you put it on. It is not see through. If applied to glass, you can see the image from the back if lit. It has a light gray adhesive but you will see a ghost image of the front. Printed on Orajet 3651GRA equivalent to Oracal 651. May not be able to cover something up. Not laminated.
REMOVABLE ADHESIVE: This is a white opaque vinyl that I print on. It has a temporary adhesive. It is meant for indoor projects and wall graphics. It is removable (not reusable) so it doesn't leave a sticky residue when removed. This is great for outdoor temporary projects, as well such as signs/sales/holiday graphics. Orajet equivalent to Oracal 631. Semi-gloss finish just like the permanent. not laminated.
CLEAR CAST ADHESIVE: The vinyl is cast, not the adhesive. There is the same clear adhesive as the clear gloss. Clear cast is also a gloss. It is very thin and able to conform to bumpy, curved surfaces. A lot of experience is needed to work with cast vinyl. not laminated.
GLITTER ADHESIVE: This is a white cast vinyl with silver holographic glitter infused in it. It is smooth to the touch and also has a clear permanent adhesive. It looks great on any color background or you can layer your vinyl with another color offset for an upgraded look. not laminated.
HTV: This is for textiles like shirts and bags. This is a smooth heat transfer vinyl and needs to be applied using a heat press. A home iron can be used but it is hard to gauge the temperature and pressure. But if you are used to applying htv with a home iron, then this will work just fine. It is a white opaque htv that I print on. It is "backwards" on the carrier so I can print on the front. The adhesive part is on the back, against the plastic carrier sheet. So your art needs to be front facing or right reading (meaning, do not mirror), then you cut it that way with the pattern face up and then you weed it and then you use a mask (which is pretty much heat resistant transfer tape) to lift off your weeded design and place it onto your shirt then press. A mask sheet is not included in your purchase. You can purchase a separate 12 inch by 12 inch sheet of mask in another listing I have here in my Etsy shop for $3. BUT you can use a clear carrier sheet that you usually throw in the trash (hopefully recycle bin). I have a drawer where I save my sheets so I can use them for printed vinyl. So start saving yours. *cut and press settings are included with your purchase. Printed on Siser ColorPrint Easy.
WATERSLIDE CLEAR: Printed on clear waterslide film using waterproof eco-solvent ink. The ink is translucent so whatever background color you place this on, will show through.
WATERSLIDE WHITE: Printed on white waterslide film with waterproof eco-solvent ink. This is opaque and will not show the background color through.
This is high quality graphics printed using a commercial printer using eco-solvent inks.
Your 12 inch by 12 inch sheet will ship flat in a sturdy envelope via USPS First Class. Included will be instructions for cutting and pressing.
Please let me know if you have any questions. I will include cut settings for several cutting machines including
Brother Scan n Cut
Silhouette Cameo
GCC iCraft
Cricut
there are also videos on YouTube to show how to apply these.
When cutting printed material, do not mirror
Use mask or transfer tape to lift design off carrier
for htv: place on shirt and use heat press or home iron to apply
for adhesive, place on hard smooth surface (clean with alcohol and let air dry first)
save your mask/transfer tape to reuse
*for all vinyl, please allow for a 1/4" variance
I apologize, but I do not accept returns on any printed product or offer any refunds on printed products or digital downloads. Please make sure you order exactly what you want before making your purchase. Did you make a mistake? Did I make a mistake? It happens, just contact me.
Color Disclaimer: Actual colors may vary. This is due to the fact that every camera and computer monitor has a different capability to capture and display colors. Everyone sees and perceive color a little differently. We try our best to capture the true color of each item to reflect the product accurately.